Entrance armored door made of 1.2 mm powder coated metal and 10 mm MDF milled panel with laminated coating.

The leaf structure of the armoured entrance door is two 10mm MDF laminated panels. Mineral wool is added for sound and heat insulation. The leaf has a 1.2 mm thick metal sheet. The thickness of the leaf is 70 mm. The front and rear panels have a beautiful milled pattern which gives a stylish finish to the model. On the hinge side, the leaf is reinforced with six passive studs that enter the frame when the door is closed.

The frame of the armored entrance door is adjustable, with sills on both sides. It is made of 1.5 mm powder-coated metal. The door has a factory fitted rubber seal along the frame, with a built-in threshold, also with a rubber seal, which helps for better insulation and easier threshold construction.

Sash and jamb dimensions can be 860/1970 mm or 900/2000 mm, covering walls up to 210, 340, 500 mm.

The door is fitted with two independent locking systems, each with three active studs, and a third, concealed latch type “latch” has been added on the inside of the leaf. It is also fitted with six passive spikes entering the frame when the leaf is closed.

The kit includes:

– wing;

– adjustable frame;

– rubber seal for frame;

– three non-adjustable hinges;

– six anti-burglar spikes;

– built-in threshold;

PRICE: 709,00 lv.

– two independent locking systems;

– two security locks: main and secondary;

– two secret cartridges;

– anti-breakage cap and cartridge armouring;

– inox satin-finished active handle

– lock with metal hammer.